The Vision Road Tubeless Rim Tape is a 25mm wide, 8 metre roll of airtight rim tape for converting road, gravel and triathlon wheels to tubeless. It covers and seals the spoke holes so your tubeless tyres and sealant hold air reliably, and one roll does both wheels.

Rim tape is the most overlooked part of a tubeless setup. If air is slowly escaping, your tyres keep going soft overnight, or sealant is weeping through the spoke holes, the tape is usually the cause. Fresh tape is the first fix we suggest to any cyclist chasing a leak, and the first step for anyone setting up tubeless for the first time.

Airtight Seal Over Spoke Holes

The tape forms a continuous airtight layer across the rim bed, so the air in your tyre stays there. It is the same tape Vision uses on its own Tubeless Ready wheels, and it works on other brands of tubeless-ready rims too.

25mm Width for Road and Gravel Rims

At 25mm, this tape suits a wide range of modern road, gravel, triathlon, time trial and cyclocross rims. It should cover the full rim bed from one bead seat to the other. Measure your rim’s internal width before you buy and pick tape a few millimetres wider than that number.

Enough for Two Wheels

The 8 metre roll gives you enough to tape a front and rear wheel with a proper overlap at the valve hole. If you’re converting a pair of wheels to tubeless, this is the only roll you need.

Clean Vision Branding

The black tape carries the Vision logo, so it looks right at home on Vision wheels and gives a tidy finish on any rim.

Frequently Asked Questions

What width rim tape do I need?
Measure the internal width of your rim and choose tape a few millimetres wider. The tape needs to run from one bead seat to the other so there is nowhere for air to escape.

Does it come with tubeless valves?
No, this is just the rim tape. You’ll also need tubeless valves and sealant to finish your setup.

Can I use it on non-Vision wheels?
Yes. It is designed for Vision Tubeless Ready wheels but works on other tubeless-ready road and gravel rims of a suitable width.

How do I fit the valve through the tape?
After taping, make a small hole over the valve hole with a sharp pick or awl, then push the valve through. A small hole gives a tighter seal around the valve base.

Item specs

• Brand: Vision
• Manufacturer part number: 752-0580000110
• Width: 25mm
• Length: 8m roll
• Coverage: 2 wheels
• Colour: Black with Vision logo
• Suits: Road, triathlon, time trial, gravel and cyclocross rims
• Compatibility: Vision Tubeless Ready wheels and other tubeless-ready rims
• Includes: 1 x roll of rim tape