Squirt Long Lasting eBike Chain Lube – Green, 120ml

Squirt e-bike Chain Wax uses the same proven and trusted, biodegradable wax/water emulsion technology as normal Squirt Chain Lube and is fortified with specialized high-pressure friction modifiers. The new Squirt e-Bike Chain Wax is slightly more slick than normal Squirt Chain Lube, which will stand up to higher torque pressure and will last longer in wet riding conditions. E-bikes place higher demands on their drivetrains than standard bicycles, due to higher torque loads and power outputs. This means that e-bike chains experience higher rates of wear. Squirt e-bike Chain Wax was specifically developed to meet these demands and negate the higher rates of wear.

• 100% biodegradable wax lube
• Capacity 120ml
• Wax based emulsion lubricant
• Long lasting
• Extends drive chain life

How frequently must I lube my chain? How often Squirt Chain Lube should be applied depends on the riding conditions. After a short while you will learn how long an application will last in your conditions. Of course, when you hear a dry chain noise, you should have applied already – so for the first few rides, whilst you learn about your conditions, it may be good idea to take a small sample bottle with you on your rides. Generally, every 4 hours on the MTB, and 6 hours on the road bike.

Application Instructions: Squirt Chain Lube is a bio-degradable wax based lubricant designed for bicycle chain lubrication in all weather conditions. Preparation and application are crucial to achieving the maximum benefits out of Squirt Chain Lube’s unique wax formula. Please read and follow the instructions below to achieve the best results and efficiency. Factory grease, old lube or oil are sticky and prevent Squirt Chain Lube from penetrating into the cavities between the chain pins, rollers and plates where it is needed to do its lubricating job. Other lubes and factory grease can also have a chemical reaction with the waxes in Squirt Chain Lube, limiting their efficiency and leaving a black residue.

Preparing your chain for first time application: We advise degreasing a new, out of the box, chain completely. For cleaning gunked up chain from previous oil, other dry lubes or new chain grease, soak in undiluted Squirt Biodegradable Bike Cleaner Concentrate for 30 minutes and use firm brush to accelerate the dissolving action. After degreasing it is imperative to clean off all degreaser thoroughly, and rinse properly a few times. Shake bottle and apply Squirt Chain Lube to the rollers on the inside of the DRY chain while turning the cranks. Allow a few minutes for the chain lube to penetrate into the gaps between the pins, plates and rollers and then apply another layer of Squirt Chain Lube after 5minutes. Allow the chain to dry completely before cycling – especially in wet conditions.