Buzzrack Eazzy Towball Mount Platform 1 Bike Carrier

$641.00

Available on back-order

Special Order

This item is stocked by our Australian supplier. Please allow extra time for processing and handling. Order online for fastest delivery.

Find out more

Need it fast? Choose EXPRESS DELIVERY!

Read more

Buzzrack Eazzy Towball Mount Platform (1 Bike Carrier) is a really smart and well designed carrier for 1 bike, ideal for joining friends for weekend rides, or for trips to the local bike shop. If you want a tilting rack, or you want to carry a long wheelbase bike, and/or an e-bike, you should have a look at the E-Scorpion 1. This is a really well designed, well engineered piece of kit; smart, sophisticated and very good value for money.

It is very easy to fold which makes for easy lifting, easy carrying, easy fitting, easy storage in the car boot when you are out for a ride.

Folds to store in the car. This is really useful, because damage to tow bar carriers in car parks from other vehicles can be an issue.

More detail about folding: because the two wheel support trays fold into the bike holder uprights (there are straps to hold them closed) it is very easy to carry around, easy to fit and remove, and easy to store. The metal parts are steel, not aluminum, but because it’s a vertical 2-handed lift it feels surprisingly light, and there should be no strain on your back when moving it and fitting it.

FEATURES

Assembly: supplied fully assembled, except for the lights which are attached with only 1 screw each side (which makes these lights particularly easy to replace if damaged) – all fittings and a tool are supplied.

Fitting to the car: You fit in its folded state, which leaves you with all the space you need to work on the tow ball fitting system. When you first place it on the tow ball it supports itself – you can let go of it and it won’t fall to the ground. You’ll then take the weight again, spin the tightening wheel until it’s tight, and lock it. Buzzrack‘s carriers comply with the very exacting standard XPR-18-904-4 and therefore include an anti-sway tensioner; this has an integrated handle and 2 or 3 turns are usually sufficient.

Lighting system: comes with Australian standard 7 pin system.

Carrying a bike: The wheel holders will accommodate all regular wheelbases, even small children’s bikes. The long wheel rubber-padded wheel straps hold tyres up to 3.25” wide; pull on them to tighten, and use the quick release to loosen. It is entirely suitable for carbon frame bikes; the rubber-padded bike frame cradles rotate 360 degrees and, again using rubber-padded straps, they hold any type of tube firmly but gently. The maximum permitted load is 20kg. Electric bikes up to 20kg may be carried.

TECHNICAL SPECIFICATIONS

  • Max number of bikes: 1
  • Max weight per bike: 20kg
  • Max load capacity: 20kg
  • Max tire size: 3.25″
  • Fits 50mm ISO tow ball: yes
  • Dimensions (width x depth): 113 x 75 cm (measured from the center of the tow ball mount to the outside edge of the number plate holder).
  • Weight: 7.3kg
  • Tilting: no
  • Integrated lighting board: yes
  • Lighting board plug type: 7 pin
  • Bike carrier to tow ball lock: yes
  • Bike carrier to bike lock: yes
  • Manufacturer: Buzzrack
  • Unit Of Measure: EA

The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier.
Requires 65mm clearance from center of tow ball to rear of vehicle.

Brand

Recommended

(35) $6.50
(16) $14.95
(22) $9.95$12.95
(6) $13.95
$14.95$16.95
(8) $11.95
New
New
New